AE1000

Battery Charger/Maintainer/Power Supply

AE1000 is a multi-functions battery charger that performs both charging & power supply functions. It supports all types of 12V starter batteries including 12V LiF starter batteries.

Features:

  • All in One, 12V Charging Mode

    Workable with all lead-acid batteries (including Start-stop EFB, Start-stop AGM, WET, MF, Ca/Ca, AGM and GEL) and LFP batteries.
    1.5 & 10 Amp switchable for battery ranging from 2.3AH to 200AH (motorcycle to HD batteries)

  • Power Supply Mode

    Without losing important configurations! It will be a good helper when replacing a battery!!
    A good helper to be deployed in car show rooms, too.

  • Save Deeply Discharged Battery

    Newly developed Battery Repair mode can repair BAD capacity storage battery automatically!
    When the battery is at low voltage level, such when you forget turning off headlights, it can recharge the deeply discharged battery as low as 2V.

  • Aesthetic Appearance

    Comes with aesthetic appearance and user-friendly LCD display.

  • Multiple Functions

    Performs battery charging and power supply for Lead-Acid & LiF starter batteries.

  • Advance Technology

    Charges a battery more effectivity. Such as low-temperature compensation, Repair mode and simple judgment function, etc.
    The low ripple power supply function doesn’t interference the ECU of the vehicles.

  • Safe & Reliable

    Microprocessor controlled 9-stage charging algorithm.
    IP65 enclosures.
    Multiple protection design.
    Over-charging protection.
    Spark free.
    Reverse poles protection.

AE1000 Production Specifications

Model Number AE1000
Display LCD
Insulation case IP65
Button Two (mode & type)
Applicate battery 12V Start-stop EFB, Start-stop AGM, WET, MF, Ca/Ca, AGM and GEL
lead-acid batteries
12V LiFePO4 starter battery
Low starting voltage 2V for Lead-acid battery
10V for LFP battery
Charging algorithm 9 stages for Flooded/AGM/GEL lead-acid battery
6 stages for LiFePO4 battery
Power supply Yes (Data saver function)
Temperature compensation Automatic (Built-in temperature sensor)
Operation temperature -20~50℃, output power is reduced automatically at high temperatures
Dimensions (mm) L210 x W98 x H60
Weight 0.9 Kgs

DHC 9-stage charging diagram

The microprocessor will charge/maintain a battery with the optimal setup

1. Desulfation: Saves a deeply discharged or a lightly sulfated battery for recovery.

2. Soft start: Tests that the battery is in suitable condition to receive a charge.

3. Fast Charge: Charges battery to 75% in the fastest and most efficient manner.

4. Repair: If the charged battery's charge storage capability is weak, it will detect and start the Repair function to recover battery automatically.

5. Absorption: When the battery reaches 75% charge, the charger output is constant with high voltage small current to 90% in a safe manner.

6. Pulse: When the battery reaches 90% charge, the charger starts a charge pulse with a smaller current to fully charge in the safest manner.

7. Analysis: Tests that the battery is retaining the charge that has been delivered.

8. Top off: Fully charge the battery without overcharging the battery.

9. Maintenance: Maintains the battery in a full state of charge.

DHC 6-stage Intelligent Switch Power Technology for charging LiFePO4 batteries

1. Soft start: Tests that the battery is in suitable condition to receive a charge.

2. Fast Charge: Charges battery to 75% in the fastest and most efficient manner.

3. Absorption: When the battery reaches 75% charge, the charger output is constant with high voltage small current to 90% in a safe manner.

4. Analysis: Tests that the battery is retaining the charge that has been delivered.

5. Top off: Fully charge the battery without overcharging the battery.

6. Maintenance: Maintains the battery in a full state of charge.

Feedback list

Post your feedback
Cart

Login

Login Success