BTW350

BTW350 is an app based wireless battery and electrical system tester, with DHC Cloud Services support, in a water and dust resistance enclosure.

Introduction video:

If can't see video, click here.

Features:

Battery, Cranking, and Charging system tester
6V and 12V battery test
12V START-STOP battery test
12V and 24V cranking/charging system test
EV (6V/8V/12V) flooded battery test
Graphical User Interface
Interactive interface makes the operation easier and provides the test results clearly.
Customer & Shop Info Available
Capable of editing and saving customer and shop info.
Remote Control via Applications
All functions are remotely controlled by a smartphone application available for iOS and Android.
Share Test Results
Test results can be share via email or image.
DHC Cloud Services
The BTW350 supports DHC Cloud Services as standard, for real time test result backup, review, and analysis.
Cable Diagnostic Tool
User can check clamp and cable condition with the built-in diagnotic tool to ensure accuracy.

Model Number	BTW350
Application	6V and 12V battery test 12V START-STOP battery test 12V and 24V cranking/charging system test EV (6V/8V/12V) flooded battery test
App Support	Android 5.1 or later iOS 15.0 or later
Wireless Connection	Bluetooth 4.2
DHC Cloud Services (mybatteryexpert.com)	Supported
Supported Battery Types	Flooded, AGM Flat Plate, AGM Spiral, EFB, VRLA, GEL
Battery Ratings	CCA/SAE, EN, JIS, DIN, IEC, CA/MCA
Operating Range	40 to 2,000 CCA(SAE)
Voltage Range	1.5V to 32V
Dimensions (L x W x H)	100 x 74.5 x 31 mm
Languages	English, French, Spanish, German, Italian, Portuguese

Internal Battery Status Indicator:

> If BTW350 is not clamped onto an external battery, press the power button for less than 2 seconds.: --- Greed LED blinks 3 times = Internal battery OK.; --- Red LED blinks 3 times = Internal battery low.
> If BTW350 is clamped onto an external battery, the LED will automatically indicates the internal battery status.: --- Greed LED blinks 3 times = Internal battery OK.; --- Red LED blinks 3 times = Internal battery low.
> BTW350 will also notify the user about internal battery condition when connected to the smartphone app.: --- If "internal battery low" message is displayed, the tester can still be operated while the internal battery is getting charge from the external battery.; --- If "internal battery low" and "internal battery needs to be charged" messages are displayed, the internal battery is extremely low and needs to be charged immidiately. The tester will be disabled while charging, however the user can still monitor external battery voltage from the app.

mybatteryexpert.com is powered by AWS.
Amazon Web Services, AWS, and the Powered by AWS logo are trademarks of Amazon.com, Inc. or its affiliates.

Post your feedback